Application Finder Reset

The Torsional PowerWheel® system was utilized to clear the connector height and achieve a superior quality weld for both 35 mm² and 50 mm² cables with the SQ4 terminal.

++ download PDF

35 mm² high quality cable is used to terminate this Rosenberger connector with limited space for the 35 mm² cable.

++ download PDF

95 mm² cable with 3,000 flexible fine strands of 0.2 mm diameter is used to terminate the Staubli terminal with limited space for required weld width of 22 mm.

++ download PDF

Prefabricated stand-up and sealed-rim bags must be sealed tightly with a top seam after filling. 

++ download PDF

Packaging lettuce from 30 µm-thin tubular bag films up to 320 mm wide places high demands on the sealing unit. BOPP films are often used for food products. 

++ download PDF

For the production of conductive coatings in battery business

++ download PDF

Reliable sieving of weld spatters only with ultrasound in the standalone system

++ download PDF

Joining different material components by means of ultrasonic riveting. Simultaneous forming of two rivet heads.

++ download PDF

Reliable joining of metal with plastic through ultrasonic riveting with differential parts scanning.

++ download PDF

Low-vibration and secure joining of electronic components through ultrasonic riveting.

++ download PDF

Tight welding of injection-moulded parts without additional sealing elements with continuous process monitoring.

++ download PDF

Securing the metal drive plate in an adjustable and low-particle manner onto a plastic disc data carrier.

++ download PDF

Ultrasonic embedding of the metal SonicLok threaded bolt inserts into a plastic housing in a durable and low-tension manner.

++ download PDF

Simultaneous ultrasonic embedding of four threaded bushes into a POM cover flange so they cannot be extracted.

++ download PDF

Ultrasonic joining of a two-part injection-moulded dosing cap with a curved surface in a liquid-tight manner without markings.

++ download PDF

Reliable welding of the two-part outlet chamber in a liquid-tight manner. Joining other applications on the same installation without long retooling times.

++ download PDF

Liquid-tight joining of injection-moulded halves of an adapter, without loose particles if possible. The visible joining seam must not be visible through the transparent plastic.

++ download PDF

Tight torsional ultrasonic sealing of a thin-walled, delicate blow-moulded part from the medical sector with a film without damage.

++ download PDF

Securely sealing the openings on components for medical technology with a membrane made of non-woven material without damage. The torsional SONIQTWIST® technology offers interesting advantages.

++ download PDF

Tightly welding the two-part damper housing made of semi-crystalline POM. The joining zone is formed as a pinched-off seam. TCS5 process controller with convenient touch screen.

++ download PDF

Removing the filter rounds with ultrasonics and simultaneously sealing the edge zone without fraying. The housing is hermetically and permanently welded after inserting the rounds.

++ download PDF

High torsional strengths and stabilities can be achieved because of the ultrasonic embedding of metal thread inserts. All inserts are embedded in one process step.

++ download PDF

Torsionally removing the filter net round from the base material in one process step with ultrasonics and welding to the cap without damage. Integrating the process into an automatic production installation.

++ download PDF

Securing insulation to a plastic cover at several points using ultrasonics. The process is carried out in a special plant with integrated IPA3505 actuator units.

++ download PDF

Despite the absence of a specific connection seam, an ideal connection is achieved by means of ultrasonic spot welding of two flat components.

++ download PDF

Protecting the opening in an electronic component against the ingress of dust with a fleece filter. Economical manufacturing of square filters with sealed edge zone and pointed corners with ultrasonics.

++ download PDF

Cutting out antiseptic dressings with additional functions from the base material with ultrasonics and sealing the edge zone against fraying at the same time.

++ download PDF

Softly sealing the edge zone of breathing masks with ultrasonics for high wear comfort. Additional insertion of high-strength strap openings.

++ download PDF

The production of face masks requires various separation and joining tasks which can be carried out perfectly with ultrasonics.

++ download PDF

Covering soft plastic foam rings for headphones with synthetic leather. All the required work processes should be carried out as far as possible in one setting.

++ download PDF

Compresses with various edge zones. Complete manufacturing of the compresses with ultrasonics in one process step. Removing the shapes and welding the edge zone at the same time.

++ download PDF

Securing electrical conductor tracks with zero backlash at several positions through ultrasonic riveting and individual path limitation.

++ download PDF

Securing the silicone ball in the plastic part in a reliable, particle-free and tight manner. Fully automatic manufacturing with process and quality monitoring.

++ download PDF

Torsional welding of membranes for temperature, pressure and humidity compensation onto a ventilation opening in an aesthetic and tight manner with minimal particle flight.

++ download PDF

Joining injection-moulded plastic parts with a three-dimensional surface with stud welding.

++ download PDF

Torsional ultrasonic welding of PTFE membranes into the ventilation opening of a housing in a tight, particle-free manner without damage.

++ download PDF

Ultrasonic far-field welding of the cylindrical, stepped plastic inlet with amorphous structure to the swirl chamber without sealing elements.

++ download PDF

Tight welding of a memory chip into a two-part polyamide housing with high amplitude requirement. Using a sonotrode made of high-strength titanium alloy.

++ download PDF

Ultrasonic welding of sensor supports into painted, thin-walled bumpers without spoiling the appearance of the visible side.

++ download PDF

Tight welding of a panel with a curved surface onto a plastic housing with LEDs without damage with a carefully designed joining seam.

++ download PDF

Accurate ultrasonic welding of the two housing halves of an electronics coupler into the right position. Integrating the ultrasonic joining process into the automatic production line.

++ download PDF

Tight welding of a reflector made of PMMA onto a rectangular ABS/PC housing without markings. Monitoring the welding quality and recording the process parameters.

++ download PDF

Ultrasonic welding of a nipple with attached springs in a tight manner and without damage to an injection-moulded automotive part made of PA6.6 GF.

++ download PDF

Welding a large inspection window into the cover of an electricity meter without any markings and in a precisely parallel position.

++ download PDF

Tight torsional ultrasonic sealing of the compensation opening of a housing part with a delicate membrane without resulting in a "membrane effect".

++ download PDF

Tightly sealing a pressure equalising port with a filter membrane. Torsional welding of membranes pre-punched with vacuum technology without damage.

++ download PDF

Punching the switch foil out of the base material and welding it in a watertight manner into a housing at the same time. Quality assurance by monitoring the parameters and recording the process data.

++ download PDF

Welding a sensor with sensitive electronics into the housing. The electronics components are not damaged due to the correct joining seam design and the frequency selection.

++ download PDF

Cost-effectively securing the electronics circuit board to the connector assembly with ultrasonics without damage. Spring-loaded rivet unit for small-diameter rivet shafts.

++ download PDF

Hermetic welding of an end cap after filling the cartridge. Thanks to ultrasonics, no adhesives or solvents are required for joining.

++ download PDF

Tightly welding a membrane into a medical part. The torsional SONIQTWISTÒ technology enables particle-free cutting and joining. The film remains smooth and undamaged.

++ download PDF

Tight and particle-free welding of a previously mechanically punched-out membrane into a medical plastic component without damage.

++ download PDF

Despite the absence of a specific joining seam, thin, flat and flexible knitted material can be reliably connected by ultrasonic spot welding without any problems.

++ download PDF

Precise and economical compacting of the end of electrical cable sets in various configurations. Quality control integrated in the production process.

++ download PDF

Economical and reliable manufacturing of strand node connections made of Cu/Cu, Al/Al or Al/Cu with the same quality. Quick conversion of the production installations with the same quality.

++ download PDF

Welding the strand end nodes for the board assembly wiring harness. Handling, accessibility, KSK compatibility and quality control are important prerequisites.

++ download PDF

Welding an aluminium cable to a two-part terminal after both contact parts made from different metals have been welded and tightly overmoulded with plastic.

++ download PDF

Permanently connecting an Al current conductor running through the body with a 120 mm2 Al cable with the lowest possible loss of current conduction.

++ download PDF

Welding an Al cable with 60 mm2 cross-section onto a nickel-plated, angled Cu terminal. The weld itself should be as narrow as possible.

++ download PDF

Contacting an insulated Al current conductor with current taps in any position in a fully automatic and secure manner. Expensive partial insulation before making the contact should be avoided.

++ download PDF

Electrical welding with ultrasonics of a mixture of Cu and Al strands in various configurations with as little contact resistance as possible.

++ download PDF

Welding an aluminium cable with a cross section of 120 mm2 to a nickel-plated copper terminal. The weld should be as narrow as possible for design reasons.

++ download PDF

Electrically connecting and compacting the rectangular cable bundle with individually enamelled wires at the end in a quick and secure manner.

++ download PDF

Securely welding enamelled Cu wires together onto a Cu terminal without removing the enamel first. The enamel residues must not affect electrical conductivity.

++ download PDF

Welding a Cu high-voltage cable with a cross-section of 70 mm2 onto a Cu contact. Maximum welding width 15 mm. Tension and shear loads must reach the specified values.

++ download PDF

Welding two fine strands with 2 x 50 mm2 cross-section (total 100 mm2) on a silver-plated Cu terminal. Significant reduction of the welding width of 30 mm as a result of the smaller installation space.

++ download PDF

Electrically connecting terminals for battery contact with Al cables with a 35–42 mm2 cross-section in a reliable manner. Simple adaptation of the welding system to various cable sizes.

++ download PDF

Electrically connecting MAS terminals for high-current applications in vehicle construction with Cu cables in a reliable and conductive manner. Simple adaptation of the welding system to the different product variants.

++ download PDF

Reliably compacting the end of a high-flex cable with 35 mm2 cross-section. Welding further cross-sections as well as cable types as end or intermediate nodes.

++ download PDF

Securely welding an Al cable with 85 mm2 cross-section in a nickel-plated Cu tubular cable lug with a wall thickness of 0.8 mm. Pull-out strength must meet specified value.

++ download PDF

Cost and weight savings in vehicle construction. Contacting an insulated Al current conductor with a bolt with SONIQTWIST® technology.

++ download PDF

Ultrasonic welding of polyethylene strips for geocells to form a honeycomb structure.

++ download PDF

Torsionally welding a compensation membrane onto an aroma protection valve with SONIQTWIST®  technology tightly without damage at high production rates.

++ download PDF

Removing medical dressings consisting of several layers for wound-healing applications and reliably sealing the edge against fraying in a single process step.

++ download PDF

Cutting breathing masks, filters, antiseptic dressings or labels with ultrasonics and welding the edge zone.

++ download PDF

Cutting blind textiles to the right width and length with ultrasonics and reliably sealing the edge zone at the same time.

++ download PDF

Continuously and intermittently separating woven labels along the width and the length with ultrasonics. Soft and sealed edges with high wear comfort.

++ download PDF

Clean, industrial cutting of sandwiches with ultrasonics at high speeds without squashing.

++ download PDF

Industrial cutting of cakes without squashing the product and without products sticking to the blade.

++ download PDF

Clean cutting of cakes and biscuits without products sticking to the blade. Industrial processing with high utilisation factor.

++ download PDF

Sealing the packaging bag reliably and tightly after filling, even if the welding area is contaminated.

++ download PDF

Sealing beverage packaging tightly through the liquid and welding in the pouring spout. Detecting leaking packaging by means of process data monitoring.

++ download PDF

Reliably and tightly sealing containers and tins with torsional SONIQTWIST® ultrasonics sealing technology.

++ download PDF

Attaching a cardboard label header after filling and sealing tubular bags. The high production capacity requires short process times.

++ download PDF

Screening carbon powder with a wide grain size range without a throughput bottleneck forming on the upper sieve decks with small mesh sizes.

++ download PDF

Screening tungsten powder with small grain size distribution with fine mesh width and high throughput.  Ultrasonic technology increases the throughput and reduces the risk of clogging.

++ download PDF

Screening medical powder for tablets with optimal separation precision. Keeping the screen fabric free from clogging for a long period of time for the required grain size tolerance.

++ download PDF

Determining the grain size distribution of ground, classified pigment powders using ultrasonics-supported screening analysis.

++ download PDF

Visually perfect surfaces thanks to the precise fractionation of the powder and minimisation of the amount of incorrectly sized grains thanks to ultrasonic support in screening machines.

++ download PDF

Cutting fabric or other materials with ultrasonics and, if required, simultaneously welding the edge. Producing any shapes in x/y systems and with 3D robots.

++ download PDF

Torsional welding of shock absorbers at the base and lid through the oil to produce an oil-tight and gas-tight seal.

++ download PDF

Economically removing even cut-outs for respiratory masks and sealing the edge zone for good wear comfort in one process step. 

++ download PDF

Electrically contacting a delicate ceramic printed circuit board coated with copper conductor tracks with a long pin with the lowest possible contact resistance.

++ download PDF

Welding a large number of battery current collector foils made of Cu to a Ni-coated Cu collector with minimum loss of power.

++ download PDF

Standardized terminals are mainly used in vehicle construction for high-current applications. The welding system must adapt to different cable dimensions and terminal sizes.

++ download PDF

Eyelet terminals are used for attaching grounding connections to the motor vehicle chassis. The individual cores must be firmly welded within the lateral terminal limits. 

++ download PDF

Welding a very fine-cored, Cu high-flex cable with 50 mm2 cross-section to a Cu contact with a maximum welding width of 9.6 mm. The fine individual strands must not be damaged.

++ download PDF

Contacting Cu-coated IGBT ceramic printed circuit boards at various points with optimum electrical conductivity. The SONIQTWIST® technology is used for accessibility reasons.

++ download PDF

Connecting the contact pins of a stator with enamelled winding wires in a electrically conductive manner. Different numbers of wires and no previous removal of the enamel layer.

++ download PDF

Owing to the increases in the price for copper, aluminium is becoming more and more important. Ultrasonic welding technology is just as suitable for aluminium strands as it is for copper strands.

++ download PDF

Electrically contacting an Al battery cap with a Cu current collector in a recess in the component in a reliable manner.

++ download PDF

Compacting or welding a twisted Cu strand with a cross-section of 160 mm2 to a high degree. Single wires must not be damaged.

++ download PDF

Securely and quickly compacting a copper braid at the ends with ultrasonics.

++ download PDF

Welding punched Cu contact studs onto a delicate Cu punched strip during the manufacturing process. No damage to the contact tracks and minimal electrical contact resistance.

++ download PDF

Welding threaded bolts or supporting rails to a deep-drawn Al housing for electronic components with SONIQTWISTÒ technology.

++ download PDF

Flush welding flat, rectangular copper conductors using ultrasonic technology without substantial thickening due to overlaps.

++ download PDF

Fractionating soldering powder in various qualities and large quantities with SONOSCREEN®easy in double-decker screening systems with excellent separation precision. 

++ download PDF

Screening fine makeup powder in large quantities, different colour shades and different qualities with high throughput rates and without any clogging of the screen.

++ download PDF

Aluminium oxide is processed in various industries. The screening system must fulfil strict requirements with regard to capacity, screen life and separation precision.

++ download PDF

Sugar is available in different qualities and grain sizes. A high throughput rate, fractionation and dedusting must be provided by means of a suitable process.

++ download PDF

Engines comprise many individual high-precision components. The parts must be cleaned in a reproducible manner before a subsequent process step.

++ download PDF

Reliably removing residual dirt from pistons and connecting rods for final engine assembly using ultrasonics. Controlled by ProfiNet bus systems

++ download PDF

High cleaning standards for surface-treated components such as exhaust systems. Fully automatic, reliable and reproducible cleaning with ultrasonic tube resonators.

++ download PDF

Removing oil, dirt, polishing paste or machining residues from small parts after final manufacture. Cavitation of ultrasonic tube resonators even reaches concealed places.

++ download PDF

Contacting an Al capacitor housing with a grounding connection solder tail. Limited access to the contact point inside the housing.

++ download PDF

A current-safe connection of a 95 mm² HV copper line on a copper terminal is to be established. The tight installation space requirements are the greatest challenge. 

++ download PDF

As a result of the trend towards miniaturization, housings with integrated cable connections are to be increasingly space-saving, which is why the stripped cable ends must become increasingly shorter.

++ download PDF